Welcome to our website!
 » Home » Product » Outdoor LED Screen » » PH10mm Outdoor Dual Color LED Screen

PH10mm Outdoor Dual Color LED Screen

PH10mm Outdoor Dual Color RG LED Screenn
contact now
  • Detailed description
  • FAQ

PH10mm Outdoor Dual Color LED Screen

Technical Specification(P10mm):

Pixel configuration DIP546 1R1G/1R1B
LEDs configuration Red:wave length: 625~630nm;1100-1300mcd
Green:wave length: 525~530nm;1900-2400mcd
Blue:wave length: 470~475nm;500-700mcd
Pixel pitch(mm) 10
Pixel density(dots/sqm) 10000
Calibrated brightness(cd/sqm,nit)  5000
Calibrated brightness proportion ratio R: G: B = 30%:60%:10%
Color temperature 3,500° ‿9,500° K(adjustable)
Contrast ratio 1,000:1
Brightness adjustment(dimming) 100 grade auto/manual-adjustment
View angle(degree)(50% brightness)  Horizontal: 120° (60° off center); Vertical: 70° (+25°/-45° off center) 
Readability viewing angle Horizontal: 150° (75° off center); Vertical: 90° (+35°/-55° off center) 
Color capability 4.4 trillion
Refresh rate(Hz) >300 Hz
Frame frequency(Hz) >60 Hz
Interface port DVI interface(DVI connector)
Input signal VGA, Video, AVI, MOV, MPG, DAT, VOB etc.
Protection grade IP65 front side/IP54 backside
LED Drive  Constant-current drive
Lifetime(hours)(50% brightness)  100,000 hours 
Signal transmission direction Horizontal
Operating temperature(Celsius degree) -30ソ65'
Storage temperature(Celsius degree) -35ソ70'
Operation humidity(RH) 0-95%
Operation humidity(RH) 0-99%
Servicing Front and back serving optional
Control mode Synchronous & asynchronous available
Communication options Wire Ethernet, Fiber Ethernet,RF wireless,GPRS
Power 120/240 V  AC single phase(50-60Hz)
Maximum power consumption(energying saving LED display screen model)(W/SQM) 368
Average power consumption(energying saving LED display screen model)(W/SQM) 147
Screen operation mode(scan/static)  1/4
Module configuration(Pixels quantities of the module) Length 32
Height 16
Module dimensions(mm) Length 320
Height 160
Cabinet configuration Length 8
Height 6
Cabinet dimensions(mm) Length 1280
Height 960
Width 170
Screen configuration(Finished complet screen system) Length 3
Height 3
Screen dimensions(m) Length 3.8400
Height 2.8800
Screen Size SQM 11.0592
Recommend Optimal Viewing Distance: Minimum & Maximum  Min 6
Max  136
Resolution ratio(dots/pixels) Length 384
Height 288
Aspect Ratio(L:H) 1.33333
Packaging configuration 2 standard cabinets in  a packing case(1 cabinet in 1 packing case when the unit cabinet is more than 1.5SQM)
Packing material Wooden case/carton/flight case(optional)
Packing quantities 5
Packing volume(CBM) 4
Packing  Dimensions(mm) Length 1385
Height 1165
Width 520
Packing weight(KG) net 829
gross 1120

Frequently Asked Questions by our customers
  • q What is LED display, LED cabinet, LED module, LED pixels
    • A The LED display is the final completed product for advertising or information showing, it was composed by a certain rows and lines of unit LED cabinet; the unit LED cabinet were composed by module certain quantity of LED modules, each LED module were composed by 16*16/16*8/8*8/4*4/1*1 LED pixels; each LED pixels were composed by 2R1G1B/2R2G1B/2R1B/2R1G/2R/1R Etc.
  • q 2. What is virtual pixel, real pixel?
    • A Real LED pixel is the physical LED pixel; virtual LED pixel is theoretically 4 times higher than real LED pixel. Actually, the real effect of the virtual pixel is not really 4 times better. It is only a much better, but not really can be 4 times better. When you LED display system is more than 640*480pixels, actually you don’t need to use virtual pixel if you plan to use the whole LED display for one advertising contents, but if you plan to divide a big LED screen into small sections for many advertising contents, the virtual pixel is still Very necessary and useful for you to achieve much better effect.
  • q 3. What is dot correction, why it is better than the common control system
    • A Dot correction is a new technology and will be the direction of future LED display industry. The much more improved color consistence& high fresh frequency make it be the only solution for high level advertising need.
  • q 4. How to choose the rational product model of the LED display
    • A Corresponding with the LED display’s best viewing distance, size, application & installation, there will be many optional product models fit for each specific project. ROI & Budget is also very important factors.
  • q 5. What is best viewing distance, how to calculate the best viewing distance of the LED display
    • A Best viewing distance refers to the distance from the LED display, where the people can see a whole and clear picture of the image on the LED display. There’s 2 ways to calculate the best viewing distance: one is by the pixel pitch, one is by the diagonal. There’s also the reason why there’s different viewing distance for same model LED display, also different viewing distance for same size LED display.
  • q 6. Why there's different viewing distance for same model of the LED display
    • A 2 ways to calculate the best viewing distance: one is by the pixel pitch, one is by the diagonal. There’s also the reason why there’s different viewing distance for same model LED display, also different viewing distance for same size LED display.
  • q 7. How to achieve the free online support:
    • A 1>Download our remote control software.
      2>Install the remote control software.
      3>After installation, you will get your PC's IP address and your password,
      4>Offering our service dept your PC's IP address and your password,
      5>Then we can remote control your PC,
      and show you how to make the correct hardware and software set up and program making.
  • q 8.Our Online service includes:
    • A 1>Controlling software using of the LED screen system.
      2>Program making of the LED screen system.
      3>Perimeter set up of the LED screen system.
  • q 9. How to get the free field service support?
    • A 1> Please contact with our serving dept, we will arrange and give you a time table on the field service support in 2 days.
      2>APOLLOMI can offer you the fastest ,the most normative
      & integerated field service support and help you concentrate more time and
      energy on your main LED screen's maketing promotion business.
      3> APOLLOMI & the customer need to sign a free field service support when signing the contract of the order.
      4> APOLLOMI& the customer should specify the time of field service support and the cost sharing items
  • q 10. What is RCG, What is CON?
    • A RCG & CON is the 2 most important LED display screen system’s basic set up. For each LED display screen, it has only one RCG &CON file. If you lose it or break it, please contact with APOLLOMI service dept for the file again
  • q 11.How to calculate brightness of each lamp under the conditions of definite brightness and pixel density ?
    • A The calculating methods as below: ( for example: 2R,1G, 1B)
      Red LED lamp brightness: brightness (CD)/M2÷dots/M2×0.3÷2
      Green LED lamp brightness: brightness (CD)/M2÷dots/M2×0.6
      Blue LED lamp brightness: brightness (CD)/M2÷dots/M2×0.1
      For example: 2500dots/sqm, 2R1G1B, brightness requirement 5000 CD/M2, so:
      Red LED lamp brightness: 5000÷2500×0.3÷2=0.3
      Green LED lamp brightness: 5000÷2500×0.6÷1=1.2
      Blue LED lamp brightness: 5000÷2500×0.1=0.2
      Brightness per pixel: 0.3×2+1.2+0.2=2.0 CD
Want to learn more?
Let out experts anawer questions about the benefits of products customized for your business.